LEONOC NEWS

Logo

Forum

Home › Forums › Leon Community › MK1 Leon 1999 – 2005 › bit of help please

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 3, 2011 at 11:01 am #2544
    Anonymous
    Inactive

    i just want 2 check b4 i buy 1 as i dont no alot bout engines at all but r the turbo intake pipes off the 225bhp engines the same as the 1s on the 180bhp engines???

    April 3, 2011 at 4:25 pm #4674
    CupraTurbo
    Member

    Hi mate no I believe there are differences as the turbos are different. If i remember correctly the 210 and the 225 are the same but the 180 fitment is smaller. A 180 bhp fitment would be same across the whole engines range with engine codes AWW, AWD, AWP, AUM, APP, AWU and AUQ.

    April 4, 2011 at 8:06 pm #4680
    Anonymous
    Inactive

    ok thanks 4 that mate, any idea were i could get 1 as all i can seem 2 find them 4 is the 225bhp models

    April 5, 2011 at 10:11 am #4682
    CupraTurbo
    Member

    Loads on ebay mate. Not sure if I can drop links here but just search ”turbo intake pipe 1.8t AUQ” and one comes up. Not sure if AUQ is your specific engine code but it will fit.

    I’m sure there will be other places you can get them from too. Aslong as they fit either the KO3 or Ko3s turbos and not the KO4 which is on the 225bhp engines. I’ll be looking to get one of these in blue shortly 😀

    April 10, 2011 at 10:17 am #4692
    Anonymous
    Inactive

    managed 2 fine 1 on ebay n have now orderd it along with fmic n 4 bar pressure reg so will b ready 4 a stage 2 revo map very soon 🙂

    thanks 4 ya help mate

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.