LEONOC NEWS

Logo

Forum

Home › Forums › Servicing, Tuning, Modifications and Ice › Cosmetic Modifications › Rear number plate lights

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 2, 2011 at 12:04 pm #2703
    Trickstar
    Participant

    I want to change my number plate lights on my 53 plate Cupra for some LED’s but as they are the double ended bulbs I will need to change the light holder.

    Has anyone done this? if so what holders did you use and does it fit properly or am i going to have to do some modding to the lights area in the bumper? I am aware that I am more then likely to have to do a little bit or wiring mod’s i.e connectors etc.

    Anyone help?

    Muchos Thankos

    November 2, 2011 at 8:13 pm #5177
    AndrewJB
    Moderator

    Imho you should be able to do a straight swap

    Sent from my Revolution ROM powered Samsung Galaxy SII using Tapa-Talk

    November 5, 2011 at 10:34 am #5186
    Seat Adam
    Member

    I put LEDs in my number plate lights, they are 37mm or 39 mm festoon bulbs. Search for these and you’ll see what you need.

    November 5, 2011 at 1:17 pm #5188
    Trickstar
    Participant

    Thanks seat adam i didnt realise they done LED’s in festoon bulbs.

    @Seat Adam wrote:

    I put LEDs in my number plate lights, they are 37mm or 39 mm festoon bulbs. Search for these and you’ll see what you need.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.