Hi all,

I’m newby here, looks like fine forum 🙂

Wonder if someone can shed some light on this question, I need to remove the oil cooler from the block on my LCR 05 (BAM) as I pulled the pipe out of the top that goes up to the vacuum system and the very bottom of the pipe by the o ring has cracked off and some bits have fallen down.

If I remove the oil cooler from the block face, leaving the water pipes intact on the piece above the filter will i get any spillage, i.e. do i need to drain anything, water system or oil system to remove this off the side of the block?

Thanks in advance 🙂